Page 31 - Weld Engineering Product Selection Pages

34 Fruit St.
“MANUFACTURERS OF THE MOST COMPLETE LINE Shrewsbury, MA 01545 (U.S.A.)
OF FLUX HANDLING EQUIPMENT IN THE WORLD”
Telephone: (508) 842-2224
Fax: (508) 842-3893
Website:
www.weldengineering.com
Email:
[email protected]
March 1, 2018

FLUX PRESSURE FEED TANK SYSTEMS

1. PT-”x”00 FLUX PRESSURE FEED TANK SYSTEM.

The PT-”x”00 is a flux pressure feed tank system for pressure feeding flux to a flux hopper or welding torch.
Many tank sizes are available, i.e. 100 pound, 300 pound, 600 pound, or larger. Also specify flux feed nozzle
(See TNOZ-”x” on page 38.) for 1/2", 3/4" or 1" I.D. flux feed hose. Compressed air input of 60 psi @ approxi-
mately 2 - 3 cfm is also required.

A. PT-3 (60 pound tank)

B. PT-100 (100 pound tank)

C. PT-300 (300 pound tank)

D. PT-600 (600 pound tank)

Please consult factory for larger size tanks.

NOTE: Electronic low or high flux level sensor is an option available for
all size pressure tanks. When flux level is low (or high, based on your
requirements), a loud audible alarm and flashing light on control panel will
signal operator. (See page 38 for sensor options).

2. HPT-”x”00 HEATED FLUX PRESSURE FEED TANK SYSTEM.

The HPT-”x”00 is the same as above PT-”x”00, but is heated to 250°F (121°C), adjust able.

A. HPT-100 (100 pound tank)

B. HPT-300 (300 pound tank)
C. HPT-600 (600 pound tank)

For high temperature electronic high or low level sensor (as de-
scribed in item no.1 above), see page 39.

NOTE: Specify flux feed hose diameter. 1/2", 3/4" or 1" are standard.
Hose does not come with tank. See page 39 for feed hoses.
(Please consult factory for larger size heated tanks.)

**Please note, the PT-”x”00 and HPT-”x”00 flux pressure feed tank systems are now manufactured with an
internal flux cone. This flux cone allows complete draining of all flux out of the tank. There is no stagnant
area in the tank, from which flux will not flow out of the tank.

page 24 2018 PRODUCT SELECTION WITH PRICES.PMD