MV-5 VACUUM

• 3/4 HP
• Small, yet heavy duty electric flux vacuum.
• Very quiet. No high pitch sound.
• Works with standard 115 VAC power. Plugs into most welders (6.7 to 8 amps).
• Very low maintenance. Easy to clean out dust.
• Comes with FHMV5-100 flux hopper, 100 LB. capacity.
• Flashing light tells you when to clean.
• Shake bag, dust falls into pan, pull out dust pan and empty.
• Perfect for girth welders.

View Optional Accessories

Open Literature Page (PDF)

Mighty Mac 1500X
Mighty Mac 1500X/P

• 2 HP
• High technology, vacuum sensing logic automatically cleans dust-clogged filters.
• Super heavy duty TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected in large dust drawer
• “Micron” cartridge dust filters easily replaced
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• High abrasion wear points
• Large gauge on control panel
• Designed for continous duty, high demand flux recovery.
• MM-1500X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

Mighty Mac 3000X
Mighty Mac 3000X/P

• 4 HP
• High technology, vacuum sensing logic automatically cleans dust-clogged filters.
• Super heavy duty TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected
• “Micron” cartridge dust filters
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• Oil free operation
• High abrasion wear points
• Designed for continous duty, high demand flux recovery.
• MM-3000X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

Mighty Mac 5000X
Mighty Mac 5000X/P

• 5.5 HP
• High technology, vacuum sensing logic automatically cleans dust-clogged filters.
• Super heavy duty TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected
• “Micron” cartridge dust filters
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• Oil free operation
• High abrasion wear points
• Designed for continous duty, high demand flux recovery.
• MM-5000X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

Mighty Mac 7500X
Mighty Mac 7500X/P

• 7.5 HP
• High technology, vacuum sensing logic automatically cleans dust-clogged filters.
• Super heavy duty TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected
• “Micron” cartridge dust filters
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• Oil free operation
• High abrasion wear points
• Designed for continous duty, high demand flux recovery.
• MM-5000X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

Mighty Mac 5000X Mill

• 5.5 HP
• Four special high capacity filters
• Super heavy duty TEFC Motor directly coupled to blower.
• Dust is automatically transferred
• Dust is automatically cleaned
• Remote on/off switch
• Super duty vacuum blower and TEFC motor
• No V-belts
• Large gauge on control panel
• Quiet, clean, dust free operation

Complete System Diagrams

View Optional Accessories

I.D. Pipe Mill System

O.D. Pipe Mill System

Open Literature Page (PDF)

SPS-1500

• 2 HP
• “Stationary heavy duty flux recovery system”
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

SPS-3000

• 4 HP
• “Stationary heavy duty flux recovery system”
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

SPS-5000

• 5.5 HP
• “Stationary heavy duty flux recovery system”
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

SPS-7500

• 7.5 HP
• “Stationary heavy duty flux recovery system”
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

PS-1500

• 2 HP
• “Portable heavy duty flux recovery system”
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

PS-3000

• 4 HP
• “Portable heavy duty flux recovery system”
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

PS-5000

• 5.5 HP
• “Portable heavy duty flux recovery system”
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)

PS-7500

• 7.5 HP
• “Portable heavy duty flux recovery system”
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• “Micron” cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 150 lb. (68 Kg) hopper/separator for flux storage.
• Ball valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

Complete System Diagrams

View Optional Accessories

Open Literature Page (PDF)